Commercial concrete settles when high traffic loads combined with sub-base erosion from surface drainage create voids that the slab bridges until it deflects. Loading dock areas and drive approaches are particularly susceptible when water routes under concrete edges. Scaldino Basement Solutions accounts for the dense suburban clay and fill soils with aging concrete surfaces conditions in Bergen County, NJ at every Wallington, NJ project. The process follows a consistent sequence: measuring joint differentials and mapping settled zones across the commercial surface, drilling ports at intervals based on slab thickness and load requirements, injecting high-density foam in calculated lifts, verifying grade compliance with a 10-foot straightedge, and patching and sealing all ports. Every step is documented so the property owner has a written record of what was found and what was done.

High-output two-component polyurethane proportioner rated for commercial volumes, 10-foot straightedge for ADA joint compliance verification, and load-rated port plugs for heavy-traffic applications The result in Wallington, NJ is a correction that holds through the full annual cycle of temperature and precipitation in this region. Scaldino has operated on this standard since 2010.

Contact Scaldino Basement Solutions at (908) 895-6016 for a site evaluation in Wallington, NJ.